Effect of poly-L-lactic acid and polydioxanone biostimulators on type I and III collagen biosynthesis.

OBJECTIVE: Safe, effective, and biocompatible minimally invasive procedures with the potential to stimulate collagen production have been made to recover dermal thickness and skin quality. The main of this animal model experiment was to observe the effect of poly-L-lactic acid (PLLA) and polydioxanone (PDO) biostimulators in collagen I and III after hypodermal injection. METHODOLOGY: Sixteen adult female rats (Wistar) were randomized into four groups and had dorsal treatment with: G1: hypodermic subcision (HS) only; G2: HS and PLLA hypodermic injection (HI), G3: HS and PDO HI; G4: Control, with no treatment. RESULTS: In histochemical, it was observed hypodermal and dermal tissue in more organized thickness in G3 and in G4 when compared to G1 and G2. There was few difference in G1 compared to G4. The tissue of G2 showed irregularities in the arrangement of collagen fibers, less defined structure and lower distribution of type I collagen compared to the other groups. There is a greater tendency for the proportions of type III collagen among tissues treated with both biostimulators (G2 and G3). PLLA and PDO had relatively similar percentages of collagen when compared to G4. The amount of type I collagen was higher in tissues treated with subcision, while type III collagen was higher in tissues treated with both biostimulators. CONCLUSION: G3 showed better performance in collagen production, although small, when compared with G2.

Assessment of patients' knowledge and preferences for the use of orthodontic aligners.

OBJECTIVE: To evaluate the knowledge and preference of patients treated at a Dental School in Jaraguá do Sul, Brazil, about using aligners and the reasons for choosing this device as a treatment option. DESIGN: A cross-sectional study. PARTICIPANTS: A total of 82 participants aged 18-45 years recruited at a screening clinic. METHODS: A questionnaire was completed in person using a tablet with digital forms. RESULTS: Almost half of the participants (49%) knew about aligners; 40% were aged 18-24 years, and 77% were female. When observing the images of the types of orthodontic appliances, the aligners had an acceptance rate of 80%. Among the reasons that led to the preference for choosing aligners, 68% cited aesthetics and 42% comfort. CONCLUSION: Recently, clear aligners have become a popular choice for orthodontic treatment, particularly among adults. Despite their popularity and effectiveness, many patients still need more information about aligner treatment. Over half of the respondents did not know what orthodontic aligners were. Younger participants had more knowledge about aligners than older participants. Patients still need more knowledge about the types of appliances available for orthodontic treatment. When presented with images of the kinds of devices available, almost 80% of participants showed greater satisfaction with aligners.

Efficacy of products for bleaching and whitening under orthodontic brackets.

INTRODUCTION: Many patients wearing orthodontic appliances request alterations in the shade of their teeth during orthodontic treatment. OBJECTIVE: This study aimed to evaluate the efficacy of different products for bleaching and whitening under orthodontic brackets. METHODS: Seventy bovine incisors were randomly divided into five groups (n = 14): C) non-whitening toothpaste (control); WTsi) hydrated silica whitening toothpaste; WThp) 2% hydrogen peroxide whitening toothpaste; OB) in-office bleaching; and HB) at-home bleaching. Two buccal surface areas were evaluated using the Easyshade spectrophotometer: under the metal bracket (experimental) and around the bracket (control). The paired t-test, ANOVA, and Tukey tests were applied for statistical analysis. RESULTS: Intragroup comparisons showed that in groups C, WThp and HB, there were statistically significant differences in the enamel color changes (ΔEab) between under and around the bracket areas (C - under bracket = 7.97 ± 2.35, around bracket = 2.86 ± 0.81, p< 0.01; WThp - under bracket = 4.69 ± 2.98, around bracket = 2.05 ± 1.41, p< 0.01; HB - under bracket = 7.41 ± 2.89, around bracket: 9.86 ± 3.32, p= 0.02). Groups WTsi, OB and HB presented similar perception of tooth whiteness (ΔWID) between the tested areas. Intergroup comparisons demonstrated that under the bracket area, the color change (ΔEab) was similar for all groups, except WThp (C = 7.97 ± 2.35; WTsi = 8.54 ± 3.63; WThp = 4.69 ± 2.98; OB = 9.31 ± 4.32; HB = 7.41 ± 2.89; p< 0.01). CONCLUSIONS: The dental color changes were effective for the products tested in groups WTsi, OB and HB in the presence of metallic orthodontic brackets.

Ação clareadora e microbiológica do enxaguante bucal com peróxido de hidrogênio: ensaio clínico / Whitening and microbiological action of mouthwash with hydrogen peroxide: clinical trial

Introdução: os enxaguantes bucais clareadores tem sido muito utilizados, porém sua eficiência e efeitos colaterais trazem questionamentos. Objetivo: este ensaio clínico teve como objetivo avaliar se o enxaguante bucal clareador, contendo peróxido de hidrogênio a 1,5%, apresenta ação clareadora e se há algum efeito secundário na cavidade bucal. Metodologia: foram selecionados 10 voluntários com idade média de 21,5 anos, submetidos a avaliação da cor dos dentes com auxílio do espectrômetro em 3 momentos: inicial; com 15 e com 30 dias de uso do enxaguante. A avaliação dos efeitos colaterais foi realizada a partir da coleta de saliva estimulada em 4 momentos: antes e depois ao primeiro uso do produto, com 15 e com 30 dias, e realizadas as análises laboratoriais: fluxo salivar; pH; quantidade de Streptococcus mutans e de Lactobacillus. A normalidade dos dados foi verificada pelo teste de Shapiro-Wilk, comparação de cor pelo teste t dependente, comparação dos microrganismos pelos testes ANOVA de medidas repetida e Tukey. Resultados: as análises de cor dos dentes não evidenciaram nenhuma alteração significativa em nenhum dos tempos investigados. No fluxo salivar, pH e Lactobacillus não houveram alterações significativas. Na quantidade de Streptococcus mutans notou-se um aumento significativo quando comparado os valores após o primeiro uso e com 30 dias. Conclusão: a solução de enxague bucal contendo peróxido de hidrogênio a 1,5% não apresentou alteração significativa na coloração dos dentes e nenhum efeito colateral significativo na atividade cariogênica de acordo com os testes e períodos avaliados.

Introduction: whitening mouthwashes have been widely used, but their efficiency and side effects raise questions. Objective: this clinical trial aimed to assess whether the bleaching mouthwash, containing 1.5% hydrogen peroxide, has a bleaching action and whether there are any side effects in the oral cavity. Methods: 10 volunteers were selected, with a mean age of 21.5 years, who underwent tooth color evaluation with the aid of a spectrometer in 3 moments: initial; with 15 and 30 days of using the washes. The evaluation of side effects was performed from the collection of stimulated saliva in 4 moments: before and after the first use of the product, at 15 and 30 days, and laboratory analyzes were carried out: salivary flow; pH; the number of Streptococcus mutans and Lactobacillus. Normal distribution was verified with Shapiro-Wilk test, comparisons of color were performed with t-test, comparisons of the microorganisms were performed with repeated measures ANOVA and Tukey tests. Results: the analysis did not show any significant changes in any of the investigated times. There were no significant changes in the salivary flow, pH and Lactobacillus. The number of Streptococcus mutans, was noted a significant increase when comparing the values after the first use and with 30 days. Conclusion: the mouthwash containing 1.5% hydrogen peroxide was not shown any significant alterations in the color teeth. There were not significant collateral effects on the cariogenic activity according to the tests and periods evaluated.

Evaluation of the botulinum toxin effects in the correction of gummy smile 32 weeks after application / Avaliação dos efeitos da toxina botulínica na correção do sorriso gengival 32 semanas pós-aplicação

INTRODUCTION: The use of botulinum toxin type A (BTX-A) to correct gummy smile has become popular in recent years. OBJECTIVE: To evaluate the effects of BTX-A application in the correction of gummy smile 2 and 32 weeks after application. METHODS: The sample comprised 35 patients (30 female, 5 male) at a mean age of 25.51 years (±5.59) with gummy smile due to muscular hyperfunction. In each patient, 2U of botulinum toxin was applied in the levator labii superioris alaeque nasi, 2 mm from the nasolabial fold. Photographs of spontaneous smiles were taken at 3 stages: before, 2 and 32 weeks after BTX application. Measurements of the gingival display were performed with the Radioface Studio 2 Software, and the calibration used the actual size of the right maxillary central incisor. Comparison of the three stages evaluated was performed with repeated measures ANOVA and Tukey tests. RESULTS: Gingival display decreased significantly 2 weeks after BTX-A application and increased after 32 weeks but did not return to the initial value. CONCLUSION: There was a significant improvement in gummy smile 2 weeks after botulinum toxin application, and a significant relapse in the gingival display after 32 weeks, however not returning to baseline values.

INTRODUÇÃO: A toxina botulínica tipo A (BTX-A) tem se tornado popular na correção do sorriso gengival nos últimos anos. OBJETIVO: Avaliar os efeitos da aplicação de BTX-A na correção do sorriso gengival 2 e 32 semanas após a aplicação. MÉTODOS: A amostra compreendeu 35 pacientes (30 mulheres, 5 homens) com uma idade inicial média 25,51 anos (±5,59) portadores de sorriso gengival devido à hiperfunção muscular. Em cada paciente foi aplicado 2U de BTX-A no músculo elevador superior da asa do nariz, 2 mm a partir da dobra nasolabial. Foram feitas fotografias dos sorrisos espontâneos dos pacientes em 3 fases: antes, 2 e 32 semanas após a aplicação de BTX-A. As medidas da exposição gengival foram feitas com o Software Radioface Studio 2, e a calibração utilizou o tamanho real do incisive central superior direito. A comparação das 3 fases foi feita com ANOVA de medidas repetidas e teste de Tukey. RESULTADOS: A exposição gengival diminuiu significantemente 2 semanas após a aplicação e aumentou novamente após 32 semanas, mas não retornando aos valores iniciais. CONCLUSÃO: Houve uma melhora significante no sorriso gengival 2 semanas após a aplicação de toxina Botulínica, e uma recidiva significante após 32 semanas, mas não retornando aos valores iniciais.

Efficacy of products for bleaching and whitening under orthodontic brackets

ABSTRACT Introduction: Many patients wearing orthodontic appliances request alterations in the shade of their teeth during orthodontic treatment. Objective: This study aimed to evaluate the efficacy of different products for bleaching and whitening under orthodontic brackets. Methods: Seventy bovine incisors were randomly divided into five groups (n = 14): C) non-whitening toothpaste (control); WTsi) hydrated silica whitening toothpaste; WThp) 2% hydrogen peroxide whitening toothpaste; OB) in-office bleaching; and HB) at-home bleaching. Two buccal surface areas were evaluated using the Easyshade spectrophotometer: under the metal bracket (experimental) and around the bracket (control). The paired t-test, ANOVA, and Tukey tests were applied for statistical analysis. Results: Intragroup comparisons showed that in groups C, WThp and HB, there were statistically significant differences in the enamel color changes (ΔEab) between under and around the bracket areas (C - under bracket = 7.97 ± 2.35, around bracket = 2.86 ± 0.81, p< 0.01; WThp - under bracket = 4.69 ± 2.98, around bracket = 2.05 ± 1.41, p< 0.01; HB - under bracket = 7.41 ± 2.89, around bracket: 9.86 ± 3.32, p= 0.02). Groups WTsi, OB and HB presented similar perception of tooth whiteness (ΔWID) between the tested areas. Intergroup comparisons demonstrated that under the bracket area, the color change (ΔEab) was similar for all groups, except WThp (C = 7.97 ± 2.35; WTsi = 8.54 ± 3.63; WThp = 4.69 ± 2.98; OB = 9.31 ± 4.32; HB = 7.41 ± 2.89; p< 0.01). Conclusions: The dental color changes were effective for the products tested in groups WTsi, OB and HB in the presence of metallic orthodontic brackets.

RESUMO Introdução: Durante o tratamento ortodôntico, muitos pacientes solicitam, também, alteração na cor dos seus dentes. Objetivo: O presente estudo avaliou diferentes produtos clareadores e branqueadores, quanto à sua eficácia sob os braquetes ortodônticos. Métodos: 70 incisivos bovinos foram aleatoriamente divididos em cinco grupos (n = 14): C) dentifrício não branqueador (controle); WTsi) dentifrício branqueador com sílica hidratada; WThp) dentifrício branqueador com peróxido de hidrogênio a 2%; OB) clareamento no consultório e HB) clareamento caseiro. Usando um espectrofotômetro Easyshade, foram avaliadas duas áreas na superfície vestibular dos dentes: sob o braquete (experimental) e ao redor do braquete (controle). Para análise estatística, foram usados os testest pareado, ANOVA e Tukey. Resultados: As comparações intragrupos demonstraram que, nos grupos C, WThp e HB, ocorreram diferenças estatisticamente significativas nas alterações de cor do esmalte (ΔEab) entre as áreas sob o braquete e ao redor do braquete (C: sob o braquete = 7,97 ± 2,35, ao redor do braquete = 2,86 ± 0,81, p< 0,01; WThp: sob o braquete = 4,69 ± 2,98, ao redor do braquete = 2,05 ± 1,41, p< 0,01; HB: sob o braquete = 7,41 ± 2,89, ao redor do braquete = 9,86 ± 3,32, p= 0,02). Os grupos WTsi, OB e HB demonstraram semelhanças na percepção do clareamento (ΔWID) entre as áreas avaliadas. As comparações intergrupos demonstraram que, nas áreas sob os braquetes, as alterações de cor (ΔEab) foram semelhantes para os grupos, com exceção do WThp (C = 7,97 ± 2,35; WTsi = 8,54 ± 3,63; WThp = 4,69 ± 2,98; OB = 9,31 ± 4,32; HB = 7,41 ± 2,89; p< 0,01). Conclusões: As alterações na cor dos dentes foram efetivas para os procedimentos testados nos grupos WTsi, OB e HB na presença de braquetes metálicos ortodônticos.

Miniscrew insertion sites of infrazygomatic crest and mandibular buccal shelf in different vertical craniofacial patterns: A cone-beam computed tomography study.

OBJECTIVE: To identify optimal areas for the insertion of extra-alveolar miniscrews into the infrazygomatic crest (IZC) and mandibular buccal shelf (MBS), using cone beam computed tomography (CBCT) imaging in patients with different craniofacial patterns. METHODS: CBCT reconstructions of untreated individuals were used to evaluate the IZC and MBS areas. The participants were divided into three groups, based on the craniofacial pattern, namely, brachyfacial (n = 15; mean age, 23.3 years), mesofacial (n = 15; mean age, 19.24 years), and dolichofacial (n = 15; mean age, 17.79 years). In the IZC, the evaluated areas were at 11, 13, and 15 mm above the buccal cusp tips of the right and left first molars. In the MBS, the evaluated areas were at the projections of the first molars' distal roots and second molars' mesial and distal roots, at a 4- and 8-mm distance from the cementoenamel junction. Intergroup comparisons were performed with analysis of variance and the Tukey test. RESULTS: There was no statistically significant difference in the IZC bone thickness among the groups. For MBS bone availability, some comparisons revealed no difference; meanwhile, other comparisons revealed increased MBS bone thickness in the brachyfacial (first molars distal roots) and dolichofacial (second molars mesial and distal roots) patterns. CONCLUSIONS: There was no significant difference in the IZC bone thickness among the groups. The facial skeletal pattern may affect the availability of ideal bone thickness for the insertion of extra-alveolar miniscrews in the MBS region; however, this variability is unlikely to be clinically meaningful.

Tratamento conservador da Classe II em paciente não-colaborador / Conservative Class II treatment in non-compliant patient

Resumo A má oclusão de Classe II tem alta incidência na população e é de difícil tratamento. Há vários protocolos para a sua correção como: extrações, uso de elásticos e propulsores mandibulares. Alguns fatores devem ser considerados durante o diagnóstico para que o plano de tratamento seja assertivo e não traga prejuízos aos pacientes. A extração de pré-molares é uma maneira eficaz e eficiente, mas pode trazer alterações indesejáveis para o perfil facial. Nesse contexto os ortodontistas podem lançar mão de opções mais conservadoras. Quando se usam elásticos, o sucesso do tratamento recai em grande parte sobre a colaboração do paciente. Se este não for colaborador, a correção sagital e o tratamento como um todo acabam sendo comprometidos. Já os propulsores mandibulares fixos são uma opção favorável para a correção da Classe II, pois independem da colaboração do paciente e são relativamente confortáveis. O objetivo deste artigo é apresentar um caso clínico de Classe II bilateral com retrusão mandibular tratado com propulsor mandibular fixo Forsus. O tratamento foi realizado sem extrações com o intuito de evitar a retração do lábio superior e aumentar a protrusão do lábio inferior, melhorando o perfil da paciente e sua autoestima. Este aparelho mostrou-se eficiente e promoveu predominantemente alterações dentoalveolares. Por ser relativamente confortável, foi bem aceito pela paciente, o que fez com que a mesma cooperasse e fosse adepta dessa modalidade de tratamento. Concluiu-se que o aparelho propulsor mandibular Forsus é efetivo para a correção da Classe II (AU)

Abstract Class II maloclusion is highly incident on the population and is difficult to treat. There are several protocols for its correction such as: extractions, use of elastics and functional appliances. Some factors have to be considered during the diagnosis in order to reach an assertive treatment plan and not to bring harm to the patients. Premolar extractions is an effective and efficient way, but it can bring undesirable alterations to the facial profile. In this context orthodontists can make use of more conservative options. When elastics are used, the treatment success depends largely on patient compliance. If the patient is non-compliant, the sagittal correction and the treatment as a whole end up being compromised. On the other hand, fixed functional appliances are a favorable option to the Class II correction, because it does not depend on patient compliance and are relatively comfortable. The aim of this article is to present a clinical case of a bilateral Class II with mandibular retrusion treated with the fixed functional appliance Forsus. The treatment was performed without extractions in order to avoid the retraction of the superior lip and increase the protrusion of the inferior lip, improving the patient's profile and consequently her self-esteem. This appliance proved to be efficient promoting predominantly higher dentoalveolar changes. Being a relatively comfortable appliance, it was well accepted by the patient who cooperated and was adept to this treatment modality. It was concluded that the fixed functional appliance Forsus is effective to correct Class II. (AU)

Evaluation of Mandibular First Molars' Axial Inclination and Alveolar Morphology in Different Facial Patterns: A CBCT Study.

OBJECTIVE: The purpose of this study was to evaluate and compare the axial inclination of the mandibular first molars and their respective bone morphology among individuals with different facial patterns. MATERIALS AND METHODS: The sample comprised the cone beam computed tomographies (CBCTs) of 58 subjects divided into three groups according to the facial patterns: 18 brachyfacial (Group 1), with a mean age of 21.58 years; 23 mesofacial (Group 2), with a mean age of 19.14 years; and 17 dolichofacial subjects (Group 3), with a mean age of 19.09 years. Eight variables were evaluated on CBCT scans of each subject: buccal and lingual mandibular height, cervical and middle mandibular width, inclination of mandibular body, inclination of the mandibular molar buccal surface, molar width, molar angulation and tooth/bone angle. Intergroup comparisons were performed with one-way analysis of variance followed by Tukey tests. RESULTS: Buccal mandibular height presented statistically significant difference in the three facial patterns. Lingual mandibular height and mandibular inclination showed to be statistically and significantly smaller in brachyfacial subjects than in the other two groups. Mandibular width presented a statistically significant difference between brachyfacial and mesofacial groups. Negative correlations could be observed between the facial pattern and the buccal and lingual mandibular heights and inclination of the mandibular body. CONCLUSION: Buccal mandibular height was significantly and progressively larger in brachyfacial, mesofacial, and dolichofacial subjects. Lingual mandibular height was significantly smaller in brachyfacial than in mesofacial and dolichofacial subjects. Mandibular width was significantly thicker in brachyfacial than in mesofacial subjects. Brachyfacial subjects had smaller mandibular inclination than mesofacial and dolichofacial subjects.

Comparison of deflection forces of esthetic archwires combined with ceramic brackets.

Coated archwires and ceramic brackets have been developed to improve facial esthetics during orthodontic treatment. However, their mechanical behavior has been shown to be different from metallic archwires and brackets. Therefore, the aim of this study was to compare the deflection forces in coated nickel-titanium (NiTi) and esthetic archwires combined with ceramic brackets. Material and Methods Non-coated NiTi (NC), rhodium coated NiTi (RC), teflon coated NiTi (TC), epoxy coated NiTi (EC), fiber-reinforced polymer (FRP), and the three different conventional brackets metal-insert polycrystalline ceramic (MI-PC), polycrystalline ceramic (PC) and monocrystalline ceramic (MC) were used. The specimens were set up on a clinical simulation device and evaluated in a Universal Testing Machine (Instron). An acrylic device, representative of the right maxillary central incisor was buccolingually activated and the unloading forces generated were recorded at 3, 2, 1 and 0.5 mm. The speed of the testing machine was 2 mm/min. ANOVA and Tukey tests were used to compare the different archwires and brackets. Results The brackets presented the following decreasing force ranking: monocrystalline, polycrystalline and polycrystalline metal-insert. The decreasing force ranking of the archwires was: rhodium coated NiTi (RC), non-coated NiTi (NC), teflon coated NiTi (TC), epoxy coated NiTi (EC) and fiber-reinforced polymer (FRP). At 3 mm of unloading the FRP archwire had a plastic deformation and produced an extremely low force in 2; 1 and 0.5 mm of unloading. Conclusion Combinations of the evaluated archwires and brackets will produce a force ranking proportional to the combination of their individual force rankings.

Comparison of deflection forces of esthetic archwires combined with ceramic brackets

Abstract Coated archwires and ceramic brackets have been developed to improve facial esthetics during orthodontic treatment. However, their mechanical behavior has been shown to be different from metallic archwires and brackets. Therefore, the aim of this study was to compare the deflection forces in coated nickel-titanium (NiTi) and esthetic archwires combined with ceramic brackets. Material and Methods Non-coated NiTi (NC), rhodium coated NiTi (RC), teflon coated NiTi (TC), epoxy coated NiTi (EC), fiber-reinforced polymer (FRP), and the three different conventional brackets metal-insert polycrystalline ceramic (MI-PC), polycrystalline ceramic (PC) and monocrystalline ceramic (MC) were used. The specimens were set up on a clinical simulation device and evaluated in a Universal Testing Machine (Instron). An acrylic device, representative of the right maxillary central incisor was buccolingually activated and the unloading forces generated were recorded at 3, 2, 1 and 0.5 mm. The speed of the testing machine was 2 mm/min. ANOVA and Tukey tests were used to compare the different archwires and brackets. Results The brackets presented the following decreasing force ranking: monocrystalline, polycrystalline and polycrystalline metal-insert. The decreasing force ranking of the archwires was: rhodium coated NiTi (RC), non-coated NiTi (NC), teflon coated NiTi (TC), epoxy coated NiTi (EC) and fiber-reinforced polymer (FRP). At 3 mm of unloading the FRP archwire had a plastic deformation and produced an extremely low force in 2; 1 and 0.5 mm of unloading. Conclusion Combinations of the evaluated archwires and brackets will produce a force ranking proportional to the combination of their individual force rankings.

O emprego de mini-implantes para intrusão do molar inferior / The use of mini-implants for mandibular molar intrusion

O aumento no número de pacientes adultos na clínica ortodôntica faz com que o profissional se depare com más oclusões causadas pela perda de um ou mais elementos dentários. Frequentemente são observadas extrusões de dentes antagonistas impossibilitando total ou parcialmente a reabilitação protética da região. A utilização de dispositivos de ancoragem temporária fixa abrange diversas mecânicas. O objetivo deste trabalho é descrever um caso clínico de uma paciente adulta, com necessidade de reabilitação protética e extrusão do elemento 46, devido à perda de seu antagonista, em que foi realizada a intrusão por meio de dois mini-implantes com resultados bastante satisfatórios. (AU)

Due to the increasing number of adult patients searching for orthodontic treatment the professional faces several malocclusions caused by the loss of one or more dental elements. Extrusions of antagonist teeth are often observed hindering total or partially the prosthetic rehabilitation of the region. The use of fixed temporary anchorage devices includes various mechanics. The objective of this work is to describe a clinical case of an adult patient, requiring prosthetic rehabilitation and extrusion of the element 46 due to the loss of its antagonist, in which the intrusion was performed using two mini-implants with very satisfactory results. (AU)

Evaluation of the force generated by gradual deflection of orthodontic wires in conventional metallic, esthetic, and self-ligating brackets.

OBJECTIVE:: The purpose of this study was to evaluate the deflection forces of Nitinol orthodontic wires placed in different types of brackets: metallic, reinforced polycarbonate with metallic slots, sapphire, passive and active self-ligating, by assessing strength values variation according to gradual increase in wire diameter and deflection and comparing different combinations in the different deflections. MATERIAL AND METHODS:: Specimens were set in a clinical simulation model and evaluated in a Universal Testing Machine (INSTRON 3342), using the ISO 15841 protocol. Data were subjected to One-way ANOVA, followed by Tukey tests (p<0.05). RESULTS:: Self-ligating brackets presented the most similar behavior to each other. For conventional brackets there was no consistent behavior for any of the deflections studied. CONCLUSIONS:: Self-ligating brackets presented the most consistent and predictable results while conventional brackets, as esthetic brackets, showed very different patterns of forces. Self-ligating brackets showed higher strength in all deflections when compared with the others, in 0.020-inch wires.

Evaluation of the force generated by gradual deflection of orthodontic wires in conventional metallic, esthetic, and self-ligating brackets

ABSTRACT Objective: The purpose of this study was to evaluate the deflection forces of Nitinol orthodontic wires placed in different types of brackets: metallic, reinforced polycarbonate with metallic slots, sapphire, passive and active self-ligating, by assessing strength values variation according to gradual increase in wire diameter and deflection and comparing different combinations in the different deflections. Material and Methods: Specimens were set in a clinical simulation model and evaluated in a Universal Testing Machine (INSTRON 3342), using the ISO 15841 protocol. Data were subjected to One-way ANOVA, followed by Tukey tests (p<0.05). Results: Self-ligating brackets presented the most similar behavior to each other. For conventional brackets there was no consistent behavior for any of the deflections studied. Conclusions: Self-ligating brackets presented the most consistent and predictable results while conventional brackets, as esthetic brackets, showed very different patterns of forces. Self-ligating brackets showed higher strength in all deflections when compared with the others, in 0.020-inch wires.

Efficiency of two protocols for maxillary molar intrusion with mini-implants.

OBJECTIVE: The aim of this study was to compare the efficiency of two protocols for maxillary molar intrusion with two or three mini-implants. METHODS: Twenty five maxillary first molars extruded for loss of their antagonists in adult subjects were selected. The sample was divided into two groups, according to the intrusion protocol with two or three mini-implants. Group 1 consisted of 15 molars that were intruded by two mini-implants. Group 2 consisted of 10 molars intruded by three mini-implants. Changes with treatment were analyzed in lateral cephalograms at the beginning and at the end of intrusion of maxillary molars. RESULTS: Results showed that there was no difference in efficiency for the two intrusion protocols. It was concluded that extruded maxillary molars can be intruded with two or three mini-implants with similar efficiency.

Efficiency of two protocols for maxillary molar intrusion with mini-implants

ABSTRACT Objective: The aim of this study was to compare the efficiency of two protocols for maxillary molar intrusion with two or three mini-implants. Methods: Twenty five maxillary first molars extruded for loss of their antagonists in adult subjects were selected. The sample was divided into two groups, according to the intrusion protocol with two or three mini-implants. Group 1 consisted of 15 molars that were intruded by two mini-implants. Group 2 consisted of 10 molars intruded by three mini-implants. Changes with treatment were analyzed in lateral cephalograms at the beginning and at the end of intrusion of maxillary molars. Results: Results showed that there was no difference in efficiency for the two intrusion protocols. It was concluded that extruded maxillary molars can be intruded with two or three mini-implants with similar efficiency.

RESUMO Objetivo: o objetivo do presente estudo foi comparar a eficiência de dois protocolos de intrusão de molares superiores com dois e três mini-implantes. Métodos: foram selecionados 25 primeiros molares superiores extruídos por perda de seus antagonistas, de pacientes adultos. A amostra foi dividida em dois grupos, de acordo com o protocolo de intrusão, com dois ou três mini-implantes: o Grupo 1 consistiu de 15 molares que sofreram intrusão com dois mini-implantes; o Grupo 2 foi constituído por 10 molares intruídos por três mini-implantes. As alterações com o tratamento foram analisadas em telerradiografias em norma lateral ao início e ao final da intrusão dos molares superiores. Resultados: os resultados mostraram que não houve diferença na eficiência dos dois protocolos de intrusão. Concluiu-se que molares superiores extruídos podem ser intruídos, com eficiência semelhante, por meio de dois ou três mini-implantes.

Tratamento da Classe III assimétrica / Assimetric Class III treatment

Este artigo apresenta o relato clínico de um caso de má oclusão de Classe III, subdivisão direita, com presença de apinhamento ântero-inferior e desvio para esquerda da linha média dentária inferior em relação ao plano sagital mediano. A paciente foi submetida a um tratamento assimétrico da má oclusão de Classe III, subdivisão, com extração do primeiro pré-molar inferior direito. Clinicamente, permaneceram a harmonia, equilíbrio e estética dos terços faciais da paciente, mantendo-se o selamento passivo dos lábios. Com relação às posições dentárias, obteve-se a correção do apinhamento dentário, ajuste da linha média dentária inferior em relação ao plano sagital mediano. A mecânica ortodôntica promoveu estabelecimento das corretas guias de desoclusão dentárias, com relações oclusais equilibradas e funcionais. Os resultados ressaltam a importância do diagnóstico correto e individualizado, com identificação dos componentes esqueléticos e dentoalveloar responsáveis pelas más oclusões. Além disso, a escolha ideal da mecânica ortodôntica parece ser fundamental, ampliando a eficácia e sucesso do tratamento.

This article presents the clinical report of a Class III malocclusion case, right subdivision, with presence of antero-inferior crowding and deviation of inferior medium dental line to the left in relation to sagital plane. Patient was submitted to Class III malocclusion asymmetrical treatment, subdivision, with extraction of the first right inferior premolar. Clinically, harmony, balance and aesthetics of the patient’s facial thirds remained, keeping passive lips sealing. Regarding to dental positions, dental crowding correction and adjustment of inferior medium dental line in relation to the medium sagital plane were achieved. The orthodontic mechanics promoted correct establishment of dental disocclusion guides, with balanced and functional oclusal relationships. The results emphasize the importance of correct and individualized diagnosis, with identification of the dentoalveloar and skeletal components responsible for the malocclusions. Besides that, the ideal choice for the orthodontic mechanics seems to be essential, enlarging the effectiveness and success of the treatment.

Alternativa de tratamento para intrusão de molares superiores / Alternative treatment for maxillary molar intrusion

A ancoragem em Ortodontia é muito discutida, pois é de fundamental importância no tratamento ortodôntico. Atualmente, a ancoragem esquelética temporária facilita os tratamentos ortodônticos e a obtenção de uma boa finalização, em que antes, na maioria das vezes, só era conseguida com a realização de cirurgia ortognática. Dentre esses recursos, encontram-se os mini-implantes e as miniplacas. O objetivo no relato deste caso clínico foi abordar a utilização de um novo dispositivo de ancoragem esquelética temporária, ou apoio ósseo, em que os mini-implantes são contraindicados, como em casos onde há maior extensão do seio maxilar; e quando as miniplacas tornam-se inviáveis pelo alto custo de instalação. Consiste na utilização de parafusos de enxerto ósseo associada com fio de amarrilho ortodôntico 0,030” para a intrusão dos primeiros molares superiores permanentes, apresentam como vantagens a facilidade de instalação e desconforto mínimo para o paciente, mantendo a estabilidade durante todo o tratamento ortodôntico.

Anchorage in orthodontics is widely discussed because it is of fundamental in orthodontic treatment. Temporary skeletal anchorage facilitates orthodontic treatments with a good finishing which usually could be obtained through orthognathic surgery. This case report aimed at addressing the use of a new temporary skeletal anchorage device or bone support, when mini-implants are contraindicated such as in cases of greater extension of the maxillary sinus; and when mini-plates become unviable due to high cost. It consists on using bone graft associated with 0.030” orthodontic ligature wire, for the intrusion of the first permanent molars. Among the advantages of this approach are its easy installation and minimal discomfort to the patient, while maintaining stability during orthodontic treatment.

Bráquetes autoligáveis / Self-ligating brackets

Os bráquetes autoligáveis tornaram-se populares recentemente no mercado ortodôntico com diversos atrativos, incluindo um modo de ligação mais rápida, menor atrito, menor dor e maior conforto ao paciente, menor número de atendimentos e menor tempo de cadeira. Embora diversos tipos de bráquetes autoligáveis tenham estado disponíveis por diversos anos, só recentemente cresceram novamente em popularidade. O objetivo deste trabalho é revisar a literatura sobre o assunto, elucidando as vantagens da utilização desses bráquetes, os efeitos dos mesmos sobre a forma do arco, inclinação dos incisivos e as diferenças com relação aos torques.

Self-ligating brackets have become popular recently in the orthodontic market with many attractions including a faster ligation, less friction, less pain and greater patient comfort, fewer appointments and shorter chair time. Although several types of self-ligating brackets have been available for several years, only recently they have grown in popularity again. The objective of this work is to review the literature on the subject, explaining the advantages of using these brackets, their effects on arch form, inclination of incisors and differences related to torques.

Comparação das alterações esqueléticas, dentárias e tegumentares entre pacientes leucodermas e melanodermas tratados ortodonticamente com extrações / Comparison of skeletal, dental and tegumental changes between caucasian and melanodermic subjects treated orthodontically with extractions

O presente estudo teve como objetivo comparar cefalometricamente as alterações esqueléticas, dentárias e tegumentares entre pacientes leucodermas e melanodermas, após tratamento ortodôntico corretivo realizado com extrações de quatro pré-molares. A amostra retrospectiva consistiu de telerradiografias iniciais e finais e modelos de gesso iniciais de um total de 46 indivíduos, sendo os critérios para inclusão a presença de relação molar de Classe I, biprotrusão dentária, apinhamento de leve a moderado, tratados com aparelhos fixos e com extrações de quatro primeiros pré-molares, bem como a presença de todos os dentes irrompidos, até primeiros molares permanentes. O Grupo 1 incluiu 28 pacientes leucodermas (9 masculino e 19 feminino), com idade inicial média de 14,39 anos (d.p.=2,63), tratados por um período médio de 2,23 anos (d.p.=0,73). O Grupo 2 incluiu 18 pacientes melanodermas (9 masculino e 9 feminino), com idade inicial média de 14,81 anos (d.p.=3,07), tempo médio de tratamento de 2,14 anos (d.p.=0,82). Para a comparação intergrupos foi utilizado o teste t independente. As alterações ocorridas foram as seguintes: nos melanodermas houve maior correção no ângulo ANB em relação aos leucodermas; os melanodermas se apresentaram com padrão de crescimento mais vertical em relação aos leucodermas; nos melanodermas houve maior extrusão dos incisivos superiores em relação aos leucodermas. Concluiu-se que a opção por extrações no tratamento ortodôntico em melanodermas deve ser cautelosa, pois, nesse estudo, observou-se que não houve alteração significante no perfil do grupo melanoderma, que ao final do tratamento apresentou-se ligeiramente biprotruso...

The present study aimed to compare cephalometrically skeletal, dental and tegumental changes in caucasian and melanodermic patients after corrective orthodontic treatment with extraction of four premolars. The retrospective sample comprised the initial and final cephalograms and the initial dental casts of a total of 46 subjects. Inclusion criteria were the presence of a Class I molar relationship, dental biprotrusion, slight to moderate anterior crowding, treated with fixed appliances, and extraction of the four first premolars, as well as the presence of all teeth irrupted. Group 1 included 28 caucasian patients (9 males and 19 females), at a mean initial age of 14.39 years (s.d.=2.63), treated for a mean period of 2.23 years (s.d.=0.73). Group 2 included 18 melanodermic patients (9 males and 9 females), at a mean initial age of 14.81 years (s.d.=3.07), treated for a mean period of 2.14 years (s.d.=0.82). For intergroup comparison, it was used the independent t test. The observed alterations were: melanodermic presented greater correction of the maxillomandibular discrepancy when compared to caucasian patients; in melanodermic the occlusal plane rotated counterclockwise and in caucasian the occlusal plane rotated clockwise; greater extrusion of the maxillary incisors was obseerved in melanodermic patients. It was concluded that the decision for extractions in orthodontic treatment of melanodermic patients should be carefuly evaluated since no significant change in the profile oof G2 patients , that at the end of the treatment presented mild biprotrusion...